PDA

View Full Version : FX Projector swap in MS6

mdogg
11-01-2007, 07:25 PM
...
Chicoloco
11-01-2007, 07:46 PM
(thumb) Post pics of the final install, and cutoffs! You will never regret all the effort with the results. I promise you. hehe.(rofl2) You can see my retro, look at my siggy link.
Killer
11-01-2007, 08:01 PM
awesome...once you get further along we will post this in the "how to" section.
mdogg
11-01-2007, 08:05 PM
...
Chicoloco
11-01-2007, 08:16 PM
I think you can use the signal of the high beam, to activate the solenoid. Don't remove the oem halogen high beam, stay with it. Make them light up with the bixenon at the same time. I would do that. You only need to activate the solenoid.

I made a complete harness from scratch for my setup. I only used the OEM wire of the bulb plugs to get a signal and send them to the relays i used.
Killer
11-01-2007, 11:50 PM
sounds good.... and just as a side note, the housing I'm working with in those pics is just a spare one I got off ebay. Once I crack open my stockers, I'll definitely get a TON of pics for the entire process!

Thanks!!!(cheers)
mdogg
11-10-2007, 01:53 AM
...
Chicoloco
11-10-2007, 09:04 AM
nice! Good write up, too. Did you color mod the FXs?
Killer
11-10-2007, 09:53 AM
Suite! Moving to How To Section
wannabe
11-21-2007, 05:54 AM
Please add at the top of the how-to post:

One is the difficulty. This will be on a 1-10 scale. One being you should not even be driving a car to 10 being Chip Foose would be impressed.

Second are the tools you used to do the job.

Third is the cost of the job (parts, outside labor and so on.).

Fourth is the “O” factor witch is also on a 1-10 scale. One being just something that has to be done like filling your car with gas or filling the washer fluid. 10 being I turned my car into the starship Enterprise with transporters and warp drive (witch would be sweet don’t lie to yourself).


Here is something for you to cut and paste at the top of your how to.

Difficulty = (Please fill in)
Tools = (Please fill in)
Cost = (Please fill in)
“O” Factor = (Please fill in)
mdogg
11-21-2007, 11:20 AM
...
wannabe
11-21-2007, 12:50 PM
:)
DuBy
11-21-2007, 01:37 PM
lol
freekwonder
11-21-2007, 06:30 PM
Nice write up. I may have to do this when I get back.
VRMS6
11-24-2007, 07:22 AM
finished pics??
chisss
11-27-2007, 11:05 AM
does it still work with the leveling headlights?
mdogg
11-27-2007, 11:31 AM
...