PDA

View Full Version : Thanks to phaudio


t3ase
07-31-2003, 10:40 PM
I, too, am considering going with N20. If nothing else just to show off by purging.. At the car meets here, a purge sound sends the whole parking lot over to whatever car did it. :D Yeah, I'm an attention whore; hence the orange car.

Anyway, speaking of the orange car. How well would Nitrous work with the MSP turbo setup? What do I need to be cautious of? I do NOT want to be going into this blindly, but I can get a hell of a deal on N20 thanks to a guy I met at the meet this last Wednesday.

Matthew
07-31-2003, 10:42 PM
i wish i had the money for nos at the moment...i would smoke my friends fucking civic hes installing a 5.5 lb turbo on it...its like the size of my pinky finger

Kooldino
07-31-2003, 10:48 PM
Nitrous cool your IC. Someone @ spool's meet did.

pdhaudio83
07-31-2003, 10:53 PM
Yeah, NX has a product "Ntercooler"

check it out, doesnt drip, supposed to be very good. Also, if used correctly, Nitrous can go well hand in hand with a turbo. But with the MSP, i would go forged before I do that.

t3ase
07-31-2003, 10:58 PM
Forged, forged, forged.

I'm going to get the MBC set to spike at 12 and run at 10 constantly. N20 with a 35 shot ONLY, since I do not plan on going to the strip, autox, whatever, should be okay with stock internals.. Mainly for show and the occasional street show off. With a 35 shot, I do not expect an extra 50hp increase, so I should be safely below the ~250hp handling capability.

t3ase
07-31-2003, 11:03 PM
Plus, are you saying I'd spray onto the intercooler ONLY with the MSP?

pdhaudio83
08-01-2003, 01:09 AM
rephrase that please, i dont understand

t3ase
08-01-2003, 11:44 AM
Would I use ONLY the Ntercooler product or would I stil spray into the engine itself?

pdhaudio83
08-01-2003, 11:50 AM
itd spray into the intercooler :)

pdhaudio83
08-01-2003, 11:50 AM
http://www.nitrousexpress.com/productdisplay.php?sku=490719&hdwt=31101&loc=101&dealer=no

t3ase
08-01-2003, 11:52 AM
So I wouldn't even have to use the standard N20 setup as N/A cars would? I'd just use the I/C sprayer? HMMMMMMM. That's very nice.

pdhaudio83
08-01-2003, 11:52 AM
apparently the Ntercooler doesnt use nitrous! and its got that UGLY F+F logo!! ugh! that ruins it right there (rant) (piss)

acidbbg
08-01-2003, 11:53 AM
I'm going to get the MBC set to spike at 12 and run at 10 constantly. N20 with a 35 shot ONLY, since I do not plan on going to the strip, autox, whatever, should be okay with stock internals.. Mainly for show and the occasional street show off. With a 35 shot, I do not expect an extra 50hp increase, so I should be safely below the ~250hp handling capability

I think that's a waste...YOu Should do what PHAUdio was talking about and get the NX Intercooler..It looks mean as hell when you have a front mount intercooler!

You will gain about 35 hp..and you won't need forged internals...IF you do shoot a 35shot...Than i would suggest forged internals..and maybe a larger turbo!!

Chas

P.S. If you purchase an Intercooler from NX you can substitiue nitrous for co2..which you can spray on your intercooler..and it would be like 2dollars per pound cheaper!! And the purge will still work!!

t3ase
08-01-2003, 12:24 PM
Well I found a setup without the F&F logo all over it. I'm curious as to how it'd work with the stock MSP intercooler, though, Looks like I need to research this a bit more before I go spray happy. Thanks for the help, you two.. I'll need more later, I'll be in contact. :)

Any helpful advice you'd give ms considering my usage/setup?

pdhaudio83
08-01-2003, 12:28 PM
no more than a 35 shot of nitrous to start, i have no idea bout the ntercooler, sounds like it just gets HP from massive cooling :)

do research, let me know what you find