I need the voltage from TPS OF MSP

[irr5302]

0-5 up or down 5-10

need input and the color of the cable to install the N-TERCOOLER
From NX IN my MSP

att IRR

thanks in advance

[pdhaudio83]

im confused, otherwise i'd help...

[perfworks]

pin 89 on the ecu wiring harness.
its brown with a yellow stripe

[1sty]

PERF!!!!!!!!!!!!!
WELCOME BACK!

Also he needed the voltage range :D

[pdhaudio83]

YAY! (yippy)

[perfworks]

Originally posted by 1st MP3 in NH
PERF!!!!!!!!!!!!!
WELCOME BACK!

Also he needed the voltage range :D

thanks. ill be back for good again once everything gets back to normal here at home. a couple of months
sorry i couldnt understand what he was asking for.
the voltage range will be 1.5-1.6 at idle and around 4 volts at WOT.
it is a 5 volt sensor though. un fortunatley the ecu will think there is something wrong over 4.5V

[irr5302]

thamkssssssssssssssssssssssssssssssssss

att irr

msp 1239/2000 PR

[1sty]

Keep me posted if at all possible about the effects and the install hassles, I am very much wanting to add this to my turbo MP3.