P5 headlights in

[CustomMSP]

What do you think?

[pip7441622]

I guess on the blue the clear headlights look good, but I would keep my stock ones on my titanium because they match.

[mp5zoomer]

looks great

[Brian MP5T]

Great, Do you find that they throw better light???

[CustomMSP]

Don't know yet, but I think the sedans have better light output. It's a lot sharper.

[Captain KRM P5]

i love p5 headlights. they look sharp on your car.

[MSP Tuner]

Looks Great !!! (2thumbs)

How bad was the wiring?

[itz_alan]

niceeeeeee :D

[vodapas77]

Sweet. I see this is becoming a more popular mod. I just got my CAD "blacked out" P5 headlights the other day and can't wait to put them on.

As was asked before, how did you do your wiring? Did you source the lows off of the fogs?

[CustomMSP]

The wiring is very easy actually. The P5 owner will need two relays, the Sedan owner will need to split a few wires that's it. There're diagrams on the forum if you do a search for "headlight swap." They're all made by "TheWire" I think. You shouldn't need to source the lowbeam off the fogs. There's a common +12 and two grounds on the sedans in that H4 harness. You need to use the common +12 for both the Low and the Hi beams. Then just connect the Low and the Hi beam negative to their correcponding harness and you're all set. You will need a multimeter. Thanks.

[vodapas77]

The wiring is very easy actually. The P5 owner will need two relays, the Sedan owner will need to split a few wires that's it. There're diagrams on the forum if you do a search for "headlight swap." They're all made by "TheWire" I think. You shouldn't need to source the lowbeam off the fogs. There's a common +12 and two grounds on the sedans in that H4 harness. You need to use the common +12 for both the Low and the Hi beams. Then just connect the Low and the Hi beam negative to their correcponding harness and you're all set. You will need a multimeter. Thanks.
Much thanks, for the info. I'll look those threads up right now. That is exactly what I was hoping to do. That way I can still keep my fogs ability to come on with my fogs.

[CustomMSP]

No problem :)

[Glowspeedp5]

Looks good man is that an mspp5 LOL

[Maxx Mazda]

I like it, and I think that more sedan owners should do it because IMO our P5 lights do seem to throw out a bit more light, but on your car I would have gone with the Canadian / Japanese spec black ones.

[Captain KRM P5]

I like it, and I think that more sedan owners should do it because IMO our P5 lights do seem to throw out a bit more light, but on your car I would have gone with the Canadian / Japanese spec black ones.
i read a magazine article that said that the protege5 headlights had the farthest "reach" of any factory lamp design

[dominoy2k1]

i dunno, i never liked the p5 headlight beam. thats why i took em off and put the stock ones back on. maybe i am just used to the mp3 ones....

[vodapas77]

The wiring is very easy actually. The P5 owner will need two relays, the Sedan owner will need to split a few wires that's it. There're diagrams on the forum if you do a search for "headlight swap." They're all made by "TheWire" I think. You shouldn't need to source the lowbeam off the fogs. There's a common +12 and two grounds on the sedans in that H4 harness. You need to use the common +12 for both the Low and the Hi beams. Then just connect the Low and the Hi beam negative to their correcponding harness and you're all set. You will need a multimeter. Thanks.
You were right the wiring was a piece of cake. Thanks for the tips on where to find the wiring diagrams. I'm happy with the results. :D

[Captain KRM P5]

how phat is that :D

[speedhawaii]

nice

[Maxx Mazda]

You were right the wiring was a piece of cake. Thanks for the tips on where to find the wiring diagrams. I'm happy with the results. :D
That looks sick! (shocked)

[CustomMSP]

It's my pleasure.

[vodapas77]

That looks sick! (shocked)
Thanks. My wife said they make it look "mean" Of course she said this as if it were a bad thing. I'll never understand women. (headshake

[tekkie]

very nice job guys (wow)

[Roywhitep5]

p5 lights are superior in every way:D

[YellowSpeed1229]

looks nice.. i was debating on doin that

[jersey_emt]

It looks even better in person.

[XFACTOR6]

is there a place online were i can order the canadian p5 headlights??

[vodapas77]

Check with www.mazdaformance.com (http://www.mazdaformance.com). But, you can't order them online, you'll have to call them.

[spd_dvl]

I know an old post but where can i locate some black out p5 head lights?

[Maxx Mazda]

Call any canadian dealer

Sunridge Mazda in Calgary, AB 403 291-7060

[TheMAN]

you can order them in the US

[spd_dvl]

For black ones? got part #'s?

[freekwonder]

I love the P5 headlights, I think they would look better if you painted them black. I always wanted to put them on my Titanium msp

[njaremka]

the canadian black headlights can be purchased in the us... part numbers are:
Right - BP4F-51-0K0
Left - BP4F-51-0L0

[Arok22]

P5 lights looking good! Makes the car look different, but in a good way. (eekdance)

[We Are Ninja]

Is the swap expensive? Yes, I'm too lazy to price it.

[njaremka]

the black lights are about $300 each new, and the chrome ones are about $200 each new

you can get them for far less used, but they are extremely hard to find

[We Are Ninja]

$300 apiece is kinda steep, but it looks sooooo good. :D

[1moreMPH]

i have a pair of blacked out p5's in my kitchen waiting to go on my silver baby :) they gonna look goooooood! im pumped.

[spd_dvl]

I called mazda directly and their list price on those part #'s is 429 each so who ever says 300 is mistaken.

[njaremka]

go to onlinemazdaparts.com and check again...

[zuku26]

I wanted to thank vodapas77 for posting these pics. I just spent like 2 hours trying to photoshop the kanook p5 headlights onto my spicy with ugly results. So I got pissed and found this post. I love the look!!! I'm thinking of retrofitting TSX projectors to them though. So I might just get US specs and paint the inside black instead of dealing with high priced canadian ones.



You were right the wiring was a piece of cake. Thanks for the tips on where to find the wiring diagrams. I'm happy with the results. :D