Grey Ghost
11-14-2004, 09:08 PM
Headlight adjustment for the halogens on the Mazda3:
Locate the zinc plated nut behind and between the high and low beams. Turn it counter-clockwise to raise the aim. Use either a 10mm socket or an offset phillips screwdriver. The drivers side can be accessed by either reaching through a small hinged plastic door or by removing the three screws and the cover over the back of the lights.
Grey Ghost
Locate the zinc plated nut behind and between the high and low beams. Turn it counter-clockwise to raise the aim. Use either a 10mm socket or an offset phillips screwdriver. The drivers side can be accessed by either reaching through a small hinged plastic door or by removing the three screws and the cover over the back of the lights.
Grey Ghost