![]() |
Compare auto reliability with reliable results at TrueDelta.com! |
|
|
#1 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
FS: 2003.5 Titanium Mazdaspeed Protege Heavily Modded
2003.5 Titanium Mazdaspeed Protégé PRICE UPDATED - ONLY $14,500 !!!!!! Quick Facts 24,000 miles Exterior – mint other than 1 small door ding (in pictures), and standard rock chips in front Interior – mint other than small stain on driver floormat VIN: JM1BJ227030646123 ----Carfax linked below Never been smoked in. Two sets of rims and tires, one of which has never been driven on. Thousands of dollars in modifications. All installed with care. New touch-up paint from Mazda will be given for stone chips. It needs a new air filter. List of modifications below. I WILL NOT PART-OUT. PRICE IS VERY REASONABLE FOR THE MODS INCLUDED. Story: I am second owner, bought it with 5k miles. First owner had a baby and needed a new house, so he could not keep up with payments. Never been smoked in, never been in any accidents, clear title. I am still paying on the car, the lien is through Huntington Bank. This thing has been babied since day one, and has even been sitting in my garage for a while. I took hundreds of pictures, and zipped them in batches of 15. These zip files are linked below. I wrote slight narrations for the pictures, which are also linked. I also just took some for the mods... so they can see I am no scam. These pictures are attached, but look horrible because my camera is starting to suck. Anyone one here can tell you this is my car, a few have even seen it in person. I made a spreadsheet of the modifications with some prices. I but a low-ball "street price" column for a more reasonable cost. This picture can be seen below. Here are the brand new items: Rear lip Bushings (F/R) Battery Headlight bulbs (Sylvania silverstars) Spark Plugs (Denso) 17” Rota Rims (never driven on) Yokohama tires (never driven on) Headlight protection film Gray Header wrap for cold pipe Blue headlight protection film Oil and coolant are fresh MODIFICATIONS: Engine: HKS EVC III Digital Boost Controller Injen Cold Air Intake - converted to SRI - powdercated blue metallic GHL 3" All Stainless Steel Turbo-Back Exhaust Denso Spark Plugs 1 step colder Pannauto Front Mount Intercooler Blue metallic powdercoated pipes - aluminum Blue hump hoses / couplers Boost Sciences Reflex Diverter Valve HKS SSQV BOV Unichip EMS with EBC (EBC not hooked up but pre-wired) New front motor mount with 88 durometer Custom grounding kit Apexi Rev Speed Meter with G-Sensor - this measures G-force around turns, 0-60 times, 1/4 mile times, and is really accurate Redline tranny fluid Mobil 1 regularly Suspension / Wheels: Tein Lowering Springs on front Racing Beat front and rear sway bars – stock BRAND NEW Bushings BRAND NEW 17" x 7.5" Rota D2 rims BRAND NEW Yokohama tires 15" Steelies with Dunlop winter tires included Black locking lug nuts included Interior: Defi Air/Fuel gauge in pillar Defi Boost gauge in pillar Polished DaveB rings HKS ECV II Controller/Screen in dash Greddy/Trust Shift Knob Kenwood MP3 CD player - stock Blue neon lights under the dash Apexi RSM mounted on dash Exterior: VIS EVO Carbon Fiber hood - painted to match car DGM Carbon Fiber Eyelids 5% Tint on rear windows - legal Stock Taillights with red vinyl overlays Stock Ground Effects Neon Light in bumper - shines on Intercooler New Mazdaspeed logo on trunk Blue headlight protection film (ready to be installed) BRAND NEW rear lip installed my Mazda CARFAX: http://www.msprotege.com/members/Cas...lis_Carfax.htm PRICING: (remember, I made up street prices so it was more realistic) ![]() THE PRICE IS $14,500 !!!!! HUNDREDS OF PICTURES: (I will post the top 10 or 15 pictures for quick viewers) http://www.msprotege.com/members/Cas...lis_MSP_01.zip http://www.msprotege.com/members/Cas...lis_MSP_02.zip http://www.msprotege.com/members/Cas...lis_MSP_03.zip http://www.msprotege.com/members/Cas...lis_MSP_04.zip http://www.msprotege.com/members/Cas...lis_MSP_05.zip http://www.msprotege.com/members/Cas...lis_MSP_06.zip http://www.msprotege.com/members/Cas...lis_MSP_07.zip http://www.msprotege.com/members/Cas...lis_MSP_08.zip http://www.msprotege.com/members/Cas...lis_MSP_09.zip http://www.msprotege.com/members/Cas...lis_MSP_10.zip NARRATION (for pictures above): http://www.msprotege.com/members/Cas.../narration.doc Rims Included: Brand New D2's ![]() Tires in garage: ![]() Car with rims photoshopped: ![]() ********************************************* PICTURES OF THE ENGINE: I will provide grey header wrap that can be used on the cold pipe. This will keep the air cold, and hide the blemish around the BOV. The powdercoating was grinded off to weld on the BOV. The zip-ties on the recirculation tube are now hose clamps... so please ignore those. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ****************************************** THE PRICE IS $14,500 !!!!! I have someone interested but have given them a deadline. If you are interested, just let me know. Remember, the pictures attached suck, and are just for the moderators. Please see the links above for good pictures. Last edited by CasopoliS; 01-29-2006 at 09:58 PM. |
|
|
|
|
#2 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
QUICK PICS FROM THE ZIP FILES
Again, my camera sucks... water spots are everywhere... sorry. I tried to make them smaller through Imageshack but screwed up. RIGHT NOW SOME ARE HUGE... I AM SORRY, I HOPE TO FIX THIS LATER. Imageshack is not fully working right now. ![]() ![]() ![]() ![]() ![]() making the pictures smaller for you guys... ![]() Yes I clean my door jams regularly... I am a stickler. ![]() ![]() ![]() ![]() ![]() The cockpit... ![]() View from backseat...
Last edited by CasopoliS; 01-18-2006 at 11:12 PM. |
|
|
|
|
#3 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
I am going to bed. I will answer any questions in the morning, and see if I can organize all that crap a little better.
I will try to make the pictures smaller in my post too. |
|
|
|
|
#4 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
Morning bump
Gotta love that off-season selling..... |
|
|
|
|
#5 |
|
voiture lente
Join Date: Dec 2004
Location: new orleans, la
Posts: 3,684
|
damn nice car man....why is everyone selling their speed now? geeze...if insurance didnt rape me id love to pick one up.
oh well...bump and good luck with the sale |
|
|
|
|
#6 |
|
Registered User
Join Date: Apr 2004
Posts: 1,555
|
nice msp, good luck selling.
|
|
|
|
|
#7 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
Thanks for the compliments guys. I think the market just sucks right now.
I think $15,000 is a good price considering how many new things come with the car, not to mention the modifications. I will add that the winter tires still have most of their tread. During the winter I washed the car (in my heated garage) all the time. It has only been driven in 1 winter since it was born . Also, the Rota D2's are on the way. If the car is sold before they get here, I will give the tires to the purchaser and have the rims directly shipped to them. These will be included in the purchase agreement, so you will be assured to get them. I am selling my MSP because my dedication is elsewhere at this point. I cannot devote the time to the car, and my lifestyle is changing. If I were to keep it I would put a MAM bottom end in, along with a GT28RS and an MPI. Thank you for looking. |
|
|
|
|
#8 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
Just to reiterate...
I will not part out the car and I will not trade for stock parts. |
|
|
|
|
#9 |
|
No more MP3
Join Date: Jul 2002
Location: Phoenix, AZ
Posts: 2,858
|
I'll throw a bump for a good looking car. Too bad you're not local, I would have considered it since I love the color. I thought about painting mine that color, yellow is getting old. Good luck with it.
__________________
Custom 3" turbo back exhaust, Fujita CAI, MPI reworked stock turbo, Blitz SBC-id EBC, HKS BOV, SU motor mount, RX-8 wheels and autoEXE "low down" springs MPI SW and key: go to post #56 and post# 94 for instructions http://www.msprotege.com/forum/showt...09#post2013109 |
|
|
|
|
#10 |
|
Mazdaspeed Approved X 3
Join Date: Mar 2004
Location: Ottawa
Posts: 1,959
|
Its a shame that you are getting rid of such a nice ride.
R
__________________
Current Rides: 10 WRX STi 07 Red MS3 04 Honda CBR600rr Previous Rides: 06 Black MS6 (sad to see it go!) 03.5 Blazin' Yellow MSP 00 Protege SE 91 Yamaha FZR 600 Other non-Mazda crap |
|
|
|
|
#11 |
|
CasopoliS Design, LLC
Donated: $20
Join Date: Aug 2004
Location: Toledo, OH
Posts: 2,488
|
Yea I will cry....
I put a lot of work into this vehicle.... lot of money lost, as you can see. I hope someone can snatch it up and take care of it for me. ALSO I have shut down many (many = like 4 at most, slight exageration) vehicles with this car... it is really fast. Boost is below 10psi all the time, and generally never get to 10. Once it was higher because I had the Unichip EBC hooked up, but only for about 1 mile worth of testing. This car has not been abused, nor has the tranny. Never been raced / tracked. Last edited by CasopoliS; 01-19-2006 at 10:54 PM. |
|
|
|
|
#12 |
|
Registered User
Join Date: Oct 2005
Location: kentucky
Posts: 61
|
umm
maybe im missing something but you just said that the car has never been raised but said that it has shutdown many cars? i may be a idiot but i think street raceing is still considered raceing
__________________
Uncle Cleet, Why do you kill the bunnys?98% of teenagers do or has tried smoking pot. If you're one of the 98% who has, copy & paste this into your sig |
|
|
|
|
#13 | |||
|
Retired MSP Racer!
Join Date: Jan 2003
Location: Portland, Or
Posts: 2,240
|
Quote:
Quote:
Quote:
Britt |
|||
|
|
|
|
#14 |
|
DoOm dOOm DooM
Donated: $5.55
Join Date: Nov 2004
Location: Ft.Walton Beach, FL
Posts: 2,212
|
sure its been raced if it wasnt then he would be fibbing, so i think hell retract his statment. who wouldnt wana open that thing up every now and then. nice car man... damn trade me for my p5 hahahahahah and of course some money
__________________
![]() MODS : Injen CAI, Megan Racing Cat-back, Espelir springs, Tokico shocks, Rota Subzero's, Pioneer DEH-P7700MP, Complete infinity speakers, infinity 12" sub, infinity 311 amp, b & m short shifter, fog light mod |
|
|
|
|
#15 |
|
I gots SPICE
Join Date: Oct 2005
Location: San Marcos, TX
Posts: 2,385
|
DAMN man.... thats only $1000 more than i paid for mine, with 10 grand less miles, and mine was stock....
shit, i wish i woulda waited 3 months!!
__________________
![]() |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS: 2003.5 Mazdaspeed Protege | kevducridr | Michigan | 14 | 08-09-2005 11:47 AM |
| 2003.5 Mazdaspeed Protege for sale | melbabean | This Forum is READ ONLY! | 2 | 03-11-2005 12:58 PM |
| 2003.5 Yellow Mazdaspeed Protege for SALE!!!! | WhiteRockMSP | This Forum is READ ONLY! | 3 | 06-26-2004 11:12 AM |
| will HKS axle back for P5 fit 2003.5 Mazdaspeed Protege? | ourLaserBlueMP5 | Protegé based Performance | 5 | 07-11-2003 10:48 PM |