new toy for the car

bermankahns · 10-16-2009, 11:17 PM

so i installed a new little toy yesterday. i got a rear upper strut bar. it's a Megan Racing one for a 93 mx-6. i think it looks quite nice in there, but it's also functional. i have noticed a little difference in the stiffness of the car around sharp turns. anyways, here's pics.

SirDaft1 · 10-16-2009, 11:59 PM

Looks good!

Matsuda03 · 10-17-2009, 12:13 AM

It looks good and improves safety, too. How much did you pay and how long did it take you? The beauty is in the details.

bermankahns · 10-17-2009, 03:42 AM

it was like $60 and took about 1 hour to do. it would have taken less time, but it was about 11pm and my light died so i did it in the dark.
here is a link to the instructions for the install.
http://www.mazdas247.com/forum/showt...hp?t=123621438
just remember, if you get one, after installing the brackets, lift the back end of the car up and then install the actual bar. otherwise it's not going to do anything for the car other than look nice.

Speedkid · 10-17-2009, 10:48 AM

Nice.

10-16-2009, 11:17 PM	#1
bermankahns Branden Join Date: Dec 2007 Location: Jacksonville, NC Posts: 246	new toy for the car so i installed a new little toy yesterday. i got a rear upper strut bar. it's a Megan Racing one for a 93 mx-6. i think it looks quite nice in there, but it's also functional. i have noticed a little difference in the stiffness of the car around sharp turns. anyways, here's pics. __________________ MazdaSpeed Axle-back, Custom Intake, NGK V-Power Plugs, Yellow Fog Lights, 10,000k HID's, 17x7 ICW Kobe wheels, 205/40/17 Fuzion ZRi's, Tein S-Techs My CarDomain

10-16-2009, 11:59 PM	#2
SirDaft1 Registered User Join Date: Apr 2008 Location: Palatine, IL Posts: 131	Looks good! __________________ 2003 Sunlight Silver P5

10-17-2009, 12:13 AM	#3
Matsuda03 Registered User Join Date: Nov 2008 Posts: 77	price? It looks good and improves safety, too. How much did you pay and how long did it take you? The beauty is in the details.

10-17-2009, 03:42 AM	#4
bermankahns Branden Join Date: Dec 2007 Location: Jacksonville, NC Posts: 246	it was like $60 and took about 1 hour to do. it would have taken less time, but it was about 11pm and my light died so i did it in the dark. here is a link to the instructions for the install. http://www.mazdas247.com/forum/showt...hp?t=123621438 just remember, if you get one, after installing the brackets, lift the back end of the car up and then install the actual bar. otherwise it's not going to do anything for the car other than look nice. __________________ Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'. Last edited by bermankahns; 10-17-2009 at 03:46 AM.

10-17-2009, 10:48 AM	#5
Speedkid Registered User Join Date: Jun 2009 Location: Richmond VA Posts: 1,064	Nice. __________________ TR Mazdaspeed 3 CPe sri,turbo inlet,motor mount,hks bov,fuel pump,standback with pnp and flash/Greddy tt/deleted resonaotors/SU solid shifter spacers/Boost gauge/35% Tint/Turboxs DP,RP and FMIC/cobb shifter weight/methanol/BSD kit with baffle/PG manifold V3/Tuned by P3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode